IceBarrel XL Thermowood Cold & Warm Plunge Tub

Cold and Warm Immersion: Adjust the water temperature from 37.4°F to 100.4°F for cold plunges or comfortably warmed soaking.

Spacious Upright Design: The 35.1-inch interior diameter provides room for one person to sit upright and achieve full-body immersion.

App-Based Temperature Control: Monitor and adjust the temperature using the dedicated smartphone app or integrated engine controls.

Ongoing Water Maintenance: Three-stage filtration, replaceable filters, and an ozone function help maintain the water between sessions.

Premium Material Construction: Combines Thermowood, fiberglass, and stainless steel for durability, insulation, and a polished appearance.

Flexible Placement: Suitable for indoor or outdoor installation without permanent plumbing.

Complete System: Includes the tub, cooling engine, hose attachments, thermal cover, filters, and essential connection components.

1. Position the tub and cooling engine on a stable, level surface that can safely support the total filled weight of the system and its user.
2. Install the tub, cooling engine, hose attachments, connectors, seals, and protective components according to the included installation manual.
3. Confirm that all water connections are properly secured before filling the tub.
4. Fill the tub to the level specified in the manufacturer’s instructions.
5. Connect the system to a compatible, properly grounded 110V, 60Hz electrical supply as directed in the manual.
6. Turn on the circulation and filtration system.
7. Select the desired water temperature using the integrated engine panel or dedicated smartphone app.
8. Allow the system to circulate until the water reaches the selected temperature.
9. Enter and exit the tub carefully. Optional stairs with handrails may be purchased separately for easier access.
10. After the session, replace the thermal cover and allow the filtration system to operate according to the manufacturer’s instructions.
11. Inspect and replace the filters as required based on usage and water condition.

Begin with a moderate temperature and a brief session. Leave the tub immediately if you experience dizziness, numbness, breathing difficulty, excessive shivering, overheating, or unusual discomfort.

Always follow the manufacturer’s installation, electrical-safety, water-care, and operating instructions.

Single-person upright immersion tub

Cold and warm water operation

Temperature range from 37.4°F to 100.4°F

Dedicated smartphone app control

Integrated engine control panel

Three-stage water-filtration system

Replaceable five-micron filters

Built-in ozone function

Included cooling and heating engine

Thermowood exterior construction

Fiberglass interior

Stainless steel components

Insulated construction

113.6-gallon water capacity

35.1-inch interior diameter

Freestanding installation

No permanent plumbing required

Suitable for indoor or outdoor use

Included thermal cover with fastening clips

Optional stairs and stainless steel handrails available separately

The IceBarrel XL combines cold and warm immersion, app-based temperature control, water filtration, and ozone functionality in one premium freestanding system. Its upright shape provides a deeper immersion experience while occupying a more compact footprint than many horizontal plunge pools.

Thermowood exterior paneling gives the tub a refined appearance suitable for an outdoor wellness area, home gym, spa room, or private studio. The fiberglass interior and stainless steel components support durability and easier routine cleaning.

Unlike a basic ice bath that requires manually adding ice, the included engine actively controls the water temperature. The three-stage filtration system, replaceable filters, and thermal cover also help simplify ongoing water care and everyday use.

Product Type: Cold and warm immersion tub

Model: IceBarrel XL

User Capacity: 1 person

Exterior Material: Thermowood

Interior Material: Fiberglass

Additional Material: Stainless steel

Temperature Range: 37.4°F to 100.4°F

Temperature Range in Celsius: 3°C to 38°C

Temperature Controls: Smartphone app and integrated engine panel

Filtration: Three-stage filtration system

Filter Rating: 5 microns

Water-Care Function: Built-in ozone function

Overall Dimensions: 62.3 in L × 40.2 in W × 46.4 in H

Interior Diameter: 35.1 in

Water Capacity: 113.6 gal (430 L)

Empty Weight: 372.6 lb

Power Supply: 110V, 60Hz

Installation Environment: Indoor or outdoor

Plumbing Requirement: No permanent plumbing required

SKU: 129676

1 × IceBarrel XL tub

1 × Cooling and heating engine

1 × Gardena hose attachment set

2 × Engine connectors

4 × Rubber seals for the engine connectors

1 × Cooling engine protector

1 × Thermo Cover XL

4 × Thermal-cover clips

4 × Screws for the thermal-cover clips

3 × Filters

1 × Installation and operation manual

Optional Accessory — Not Included

The following components are included only when the optional stair configuration is purchased:

• Lower step
• Upper step
• Stainless steel handrails
• Installation hardware

Do not display the stairs as included with the standard tub unless the selected product option specifically includes them.

This product includes the following limited manufacturer’s warranty:

• Consumer Use: Two-year limited warranty
• Light Commercial Use: Six-month limited warranty

Warranty coverage is subject to the manufacturer’s official terms, exclusions, installation requirements, maintenance requirements, and claims process. Improper installation, unsuitable electrical connections, neglected water maintenance, unauthorized modifications, or use outside the manufacturer’s instructions may affect warranty eligibility.

Customers should retain their order information and contact Balance Wellness Co. for assistance with an eligible warranty request.

The manufacturer’s warranty does not replace the Balance Wellness Co. return and refund policy.

Can the IceBarrel XL provide both cold and warm water?

Yes. Its temperature-control system supports settings from 37.4°F (3°C) to 100.4°F (38°C), allowing it to be used for cold plunges or warm soaking.

How many people can use the tub at once?

The IceBarrel XL is designed to accommodate one person at a time.

How is the water temperature controlled?

The temperature can be monitored and adjusted through the dedicated smartphone app or the integrated engine control panel.

Does the system require ice?

The included temperature-control engine actively cools the water, so routinely adding ice is not required for normal operation.

Does it require permanent plumbing?

No. The system is designed for freestanding installation without permanent plumbing. Follow the manufacturer’s instructions for filling, draining, and connecting the engine.

Can it be installed outdoors?

Yes. The supplier lists the system for indoor or outdoor use. Install it on a stable, level surface and follow the manufacturer’s requirements for electrical safety, drainage, ventilation, weather exposure, and use of the protective cover.

What is the tub made from?

The system combines a Thermowood exterior, fiberglass interior, and stainless steel components.

How much water does it hold?

The tub has a supplier-listed water capacity of 113.6 gallons, or 430 liters.

Does it filter the water?

Yes. It includes a three-stage filtration system with replaceable five-micron filters.

What does the ozone function do?

The built-in ozone function works with the filtration system to support ongoing water maintenance. Customers must still inspect the water, clean the tub, and replace the filters according to the manufacturer’s instructions.

Are the stairs included?

Not with the standard configuration. The lower and upper steps, stainless steel handrails, and installation hardware are optional and are included only when the stair configuration is purchased.

What electrical supply is required?

The supplier specifies a 110V, 60Hz power supply. The installation must comply with the manufacturer’s electrical requirements and applicable local electrical standards.

How heavy is the tub?

The empty system has a supplier-listed weight of 372.6 lb. The installation surface must also support the water, cooling engine, accessories, and user.

What warranty is included?

The product includes a two-year limited warranty for consumer use and a six-month limited warranty for light commercial use, subject to the manufacturer’s official terms.

Who should consult a healthcare professional before use?

Anyone who is pregnant, has a cardiovascular condition, has difficulty regulating body temperature, has circulation concerns, uses implanted medical equipment, takes medication affecting temperature response, or has another relevant health condition should consult a qualified healthcare professional before cold or warm immersion.